Shipping today: original HDRX-R450 line — configured platform: quotations open · qualification units planned 2027 Q2
The Spectronik Protium-3000 (3 kW) specifies a hydrogen inlet of 0.7 bar (10 psig) in its manufacturer datasheet. There is no universal fuel-cell regulator — outlet pressure and flow must be fitted to the stack. This is the MEYER configuration fitted for it:
What regulator does the Protium-3000 need?
A two-stage regulator fitted to 0.7 bar (10 psig) at the stack inlet — held to ±0.1 bar as standard — with flow sized at 48 SLPM, rated for 350–500 bar cylinder supply. Single-stage units drift as the cylinder empties; the HDRX-R's second stage works from a near-constant intermediate pressure, so the Protium-3000's inlet window holds from full cylinder to reserve. Build it in the configurator — the part number compiles as you go.
HDRX-R350-070-48-P… · ports set in the configurator
Fitted outlet setpoint
0.7 barg — inside the Protium-3000 window, held to ±0.1 bar as standard
The Protium-3000 specifies a hydrogen inlet of 0.7 bar (10 psig) per its manufacturer datasheet. The fitted MEYER configuration is HDRX-R350-070-48: outlet set inside that window and held to ±0.1 bar as standard, flow sized at 48 SLPM (datasheet).
Can I use it with cylinder pressures above 350 bar?
Yes — the same fitted outlet and flow are available in 400, 450 and 500 bar supply classes (HDRX-R400/R450/R500); select the supply class in the configurator.
Is the regulator available now?
The original HDRX-R450 450-bar drone regulator line is available today. The next-generation configured HDRX-R platform is in its development programme: configuration quotations are open now, and qualification units are planned for 2027 Q2. Your quotation carries your exact configuration.