Configure Your HDRX-R Regulator

HDRX-R SERIES ▸ FLIGHT HARDWARE CONFIGURATOR ▸ DATA VERIFIED JUL 2026 ▸ REV C
Build your regulator.
Five decisions — gas, stack, supply, ports, mounting. The configuration record on the right compiles as you go. Compatibility is confirmed by engineering review before quotation; no payment, no account. Response ≤ 2 business days. Two-stage architecture · SS 316 wetted path · H₂-embrittlement-resistant.
01Gas serviceH₂ · fuel-cell supply
02Fuel cellIE-SOAR 800W Gen2
⚙ CUSTOM OVERRIDE — MY OWN NUMBERS
INLET FIGURES PER MANUFACTURER DATASHEETS — VERIFY AGAINST YOUR FUEL CELL’S MANUAL REVISION. TRADEMARKS BELONG TO THEIR OWNERS; NO AFFILIATION OR ENDORSEMENT IMPLIED.
Outlet setpoint — override
barg · held ±0.1
Peak flow — override
SLPM
OVERRIDE ACTIVE — YOUR NUMBERS REPLACE THE FUEL-CELL DEFAULTS. OUTLET 0.2–10 BARG, SET AT ORDER. MEDIA COMPATIBILITY + FLOW SIZING CONFIRMED IN OUR REPLY.
03Supply pressure350 bar
04Port mapCOPV M18×1.5 · 4 active / 8
ONE COPV PORT (M18 × 1.5) + 8 SERVICE PORTS: PORTS 1–4 HP · PORTS 5–8 LP — UNUSED PORTS SHIP PLUGGED.
COPV
COPV BOSS THREAD: METRIC M18–M24, OR AS5202 / MS33649 (-18 AND UP) FOR SPACE PROGRAMMES — SET BY THE CYLINDER BOSS GEOMETRY.
REGULATOR · BOTTOM VIEW
THREAD CALL-OUTS ARE VERIFIED AGAINST YOUR MATING PARTS AT ENGINEERING REVIEW — SEND VALVE / STACK DRAWINGS WITH THE RFQ IF UNSURE.
05Mounting & massdirect · target 250 g
DIRECT CYLINDER MOUNTno HP interstage plumbing REMOTEevaluated per project
Target mass
125 gaggressive 150 g 175 g 200 g 225 g 250 gbaseline
TARGETS BELOW BASELINE ARE AN ENGINEERING TRADE (PORT COUNT, MATERIALS, ENVELOPE) — FEASIBILITY CONFIRMED AT REVIEW.
CONFIGURATION RECORD● COMPILING · HDRX-R · JUL 2026
Gas
gaseous hydrogen
Fuel cell
IE-SOAR 800W Gen2 · 800 W
Outlet
0.9 barg · held to ±0.1
Flow
15 SLPM · fitted, sized
Supply
350 bar · 5,000 psi
Architecture
two-stage · SS 316 wetted path
COPV port
M18 × 1.5
HP ports 1–4
LP ports 5–8
Ports active
4 of 8 · direct mount
Mass / env.
target 250 g · Ø 65 mm
Matched COPV
HDRX-068-H2 · 161 g H₂ · 2.8 kg
Units / qty
6–25 · development
PART NUMBER
HDRX-R350-090-15-1H1L
Units — estimated quantity
1–5prototype 6–25development 26–100pre-series 100+series
Contact — quotation goes here
DELIVERABLES: FITTED SPEC REVIEWED LINE BY LINE · PART NUMBER + SHAREABLE LINK · CONFIGURATION RECORD PDF + SERIES DATASHEET WITH QUOTATION. NO PAYMENT NOW — REPLY ≤ 2 BUSINESS DAYS. COMPATIBILITY CONFIRMED BY ENGINEERING REVIEW, NEVER BY THIS FORM.

Can I configure a hydrogen drone regulator online?

Yes — this configurator builds a MEYER HDRX-R two-stage regulator to your fuel cell in five decisions: gas service (hydrogen, helium or custom), the stack (fitted setpoints for 16 fuel cells from Intelligent Energy, H3 Dynamics, Spectronik and Honeywell — or your own numbers), supply pressure (350–500 bar), an 8-port map with COPV boss threads from M18 × 1.5 to AS5202 and MS33649 space bosses, and mounting with target mass from 125 g. It compiles a unique part number and configuration record as you go; submitting requests a configured quotation — engineering review confirms compatibility, no payment, reply within 2 business days.

Related: HDRX-R series for fuel-cell UAVs · helium service · custom regulator engineering · matched COPV catalog

Scroll to top